Cavalli Transportes

Item Tag: Long, Bulge Closed

(16) ATV Bulge Lug Nuts Tuner Silver, 10×1.25 M10x1.25, for Honda Yamaha & More

[ SPECIFICATIONS ] Nut Height: 1.40 inches Hex Size: 14mm Thread Pitch: 10×1.25 [ FITMENTS ] Compatible with 4-Lug ATVs that have 10×1.25 wheel studs Powered by Frooition Compatible with Arctic Cat Prowler Wildcat. Compatible with Honda Recon FourTrax Foreman Rancher Rincon Rubicon TRX. Compatible with Kawasaki Bayou Brute Force Prairie KFX Mule. Compatible with Suzuki King Quad Quadrunner Vinson. Compatible with Yamaha Big Bear Bruin Grizzly Kodiak Rhino Raptor Timberwolf Warrior Wolverine. Compatible with Can Am Commander Maverick Outlander Quest Renegade. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have M10x1.25 10×1.25mm Studs. Total Length: 1.25 inches | Thread Size & Pitch: 10×1.25 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 14mm | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements. SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels’ lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. INCLUDED: One Package contains a 16 Pack of Long, Bulge Closed Lug Nuts. These chrome Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. These 10×1.25 lug nuts are not an oem or genuine OE part. But we are confident you’ll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance. Quantity Set of 16 Lug Nuts Thread Size 10×1.25 Type Long, Bulge Closed Seat Type Cone Seat Nut Height 1.25 inches Material Steel (Heat Treated) Color Silver / Chrome FITMENT INFORMATION These Lug Nuts can fit any vehicle with studs that are the following thread pitch: 10×1.25 | 10mmx1.25 | M10x1.25 | 10×1.25mm | UNF RH Wheel Stud Length WARNING: If your wheel studs are longer than 38mm (1.5 inches), these nuts will bottom out, potentially causing accident and/or injury. Important Notes Important Notes Legal Disclaimer Important Notes Before Purchasing Verify Thread Size – If your vehicle is not shown as compatible above, it is the buyer’s responsibility to ensure they are purchasing the correct thread size. Verify Seat Type – Wheel Lug Holes have a variety of seat types. It’s impossible for us to know what you have. Therefore, it is the buyer’s responsibility to verify the seat of this nut matches their wheels Verify Stud Length – If your wheel studs are longer than 38mm (1.5 inches), this lug nut will not fit Verify Lug Nut Measurements – We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels. Installation Professional Installation Recommended Be sure to torque the lug nuts to the vehicle manufacturer specifications Avoid using an impact wrench; improper usage may cause damage to components Check and re-torque after 25-50 miles of driving Legal Information Legal Information NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility. More Items! View more great items! Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

20pc 1/2″ Chrome Bulge Lug Nuts | Acorn Cone Conical Seat | Closed End | Silver

[ SPECIFICATIONS ] Nut Height: 1.40 inches Hex Size: 19mm (3/4″) Thread Pitch: 1/2-20 [ FITMENT ] Compatible with FORD 1992-2011 Crown Victoria, 1958-1988 Thunderbird, 1964-2014 Mustang, 1986-1997 Aerostar. Compatible with FORD 1992-1996 Bronco, 1984-1990 Bronco II, 1983-2012 Ranger. Compatible with FORD 1992-2006 E-150 Econoline, 2006-2014 Edge, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with FORD 1987-1996 F-150, 2009-2019 Flex, 1960-1979 Ranchero. Compatible with DODGE: 1970-1974 Challenger, 1966-1978 Chager, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. Compatible with LINCOLN: 2003-2005 Aviator, 1961-1979 Continental, 2007-2015 MKX, 1984-1992 Mark VII, 1981-2011 Town Car. Compatible with GMC: 1985-2002 Safari. Powered by Frooition Compatible with Ford 1992-2011 Crown Victoria, 1958-1988 Thunderbird, 1964-2014 Mustang, 1992-1996 Bronco, 1984-1990 Bronco II, 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac, 1987-1996 F-150, 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1970-1974 Challemger, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2″-20 1/2×20 1/2″x20 Studs. Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4″) | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements. SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels’ lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. INCLUDED: One Package contains a 20 Pack of Long, Bulge Closed Lug Nuts. These chrome Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You’ll also need a 19mm (3/4″) Hex Socket Key Tool. These 1/2-20 lug nuts are not an oem or genuine OE part, but are compatible with various Ford, Dodge, Lincoln vehicles. We are confident you’ll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance. Quantity Set of 20 Lug Nuts Thread Size 1/2-20 Type Long, Bulge Closed Seat Type Cone Seat Nut Height 1.40 inches Hex Size 19mm (3/4″) Material Steel (Heat Treated) Color Silver / Chrome FITMENT INFORMATION These Lug Nuts can fit any vehicle with studs that are the following thread pitch: 1/2″ | 1/2″x20 | 1/2×20 | 1/2-20 | 1/2″-20 | UNF RH SAE Wheel Stud Length WARNING: If your wheel studs are longer than 36mm (1.41 inches), these nuts will bottom out, potentially causing accident and/or injury. Important Notes Important Notes Legal Disclaimer Important Notes Before Purchasing Verify Thread Size – If your vehicle is not shown as compatible above, it is the buyer’s responsibility to ensure they are purchasing the correct thread size. Verify Seat Type – Wheel Lug Holes have a variety of seat types. It’s impossible for us to know what you have. Therefore, it is the buyer’s responsibility to verify the seat of this nut matches their wheels Verify Lug Nut Measurements – We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels. Installation Professional Installation Recommended Be sure to torque the lug nuts to the vehicle manufacturer specifications Avoid using an impact wrench; improper usage may cause damage to components Check and re-torque after 25-50 miles of driving Legal Information Legal Information NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility. More Items!View more great items24pc Chrome Bulge XL Long Lug Nuts | 1/2″ Threads for 6-lug Dodge | Closed End$34.89(24) 14×1.5 Lug Nuts | Acorn Bulge Long Closed | XL Tall Chrome | 14×1.5 Threads$21.4924pcs M12x1.5 Bulge Lug Nuts, 1.4″ Length, Closed End, Cone Taper Seat, Black$18.3920pcs M14x1.5 Bulge Lug Nuts, 1.8″ Length, Closed End, Cone Taper Seat, Black$18.25 Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

20pc 12×1.5 Bulge Chrome Bulge Lug Nuts (Ball Seat) for Acura Honda OEM Wheels

[ SPECIFICATIONS ] Nut Height: 1.33 inches Hex Size: 19mm (3/4″) Thread Pitch: 12×1.5 [ FITMENT ] Compatible with Acura Compatible with Chevrolet Compatible with Honda Compatible with Lexus Compatible with Mazda Compatible with Mitsubishi Compatible with Scion Compatible with Toyota Works with 4-Lug and 5-Lug vehicles. [ NOTE ]: Buyers must verify their vehicle has 12×1.5 Thread Pitch Wheel Studs. Powered by Frooition Compatible with Acura. Compatible with Chevrolet Camaro Corvette S10 Blazer. Compatible with GMC Jimmy S15. Compatible with Honda Accord Civic. Compatible with Hyundai Veloster Tiburon. Compatible with Lexus IS GS. Compatible with Kia Optima. Compatible with Mazda Miata RX8. Compatible with Mitsubishi Eclipse Lancer. Compatible with Scion xB tC. Compatible with Toyota Avalon Camry Corolla. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have M12x1.5 12×1.5mm Studs. Total Length: 1.33 inches | Thread Size & Pitch: 12×1.5 | Seat Type: Ball Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4″) | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements. SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels’ lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. INCLUDED: One Package contains a 20 Pack of Long, Bulge Closed Lug Nuts. These chrome Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You’ll also need a 19mm (3/4″) Hex Socket Key Tool. These 12×1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Acura, Honda vehicles. We are confident you’ll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance. Quantity Set of 20 Lug Nuts Thread Size 12×1.5 Type Long, Bulge Closed Seat Type Ball Seat Nut Height 1.33 inches Hex Size 19mm (3/4″) Material Steel (Heat Treated) Color Silver / Chrome FITMENT INFORMATION These Lug Nuts can fit any vehicle with studs that are the following thread pitch: 12×1.5 | 12mmx1.5 | M12x1.5 | 12×1.5mm | UNF RH Wheel Stud Length WARNING: If your wheel studs are longer than 36mm (1.41 inches), these nuts will bottom out, potentially causing accident and/or injury. Important Notes Important Notes Legal Disclaimer Important Notes Before Purchasing Verify Thread Size – If your vehicle is not shown as compatible above, it is the buyer’s responsibility to ensure they are purchasing the correct thread size. Verify Seat Type – Wheel Lug Holes have a variety of seat types. It’s impossible for us to know what you have. Therefore, it is the buyer’s responsibility to verify the seat of this nut matches their wheels Verify Lug Nut Measurements – We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels. Installation Professional Installation Recommended Be sure to torque the lug nuts to the vehicle manufacturer specifications Avoid using an impact wrench; improper usage may cause damage to components Check and re-torque after 25-50 miles of driving Legal Information Legal Information NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility. More Items!View more great items23pc Chrome Bulge XL Long Lug Nuts | 1/2″ Thread for Jeep w/ Spare | Closed End$17.9924pc Chrome Bulge XL Long Lug Nuts | 1/2″ Threads for 6-lug Dodge | Closed End$25.75(24) 14×1.5 Lug Nuts | Acorn Bulge Long Closed | XL Tall Chrome | 14×1.5 Threads$19.7824pc Black Bulge Lug Nuts | 14×2 Threads | for Ford Expedition F150 Navigator$25.21 Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.